Table of Contents
Advertisement
S A F E T Y F E A T U R E S
Forward Collision Warning
With Mitigation —
If Equipped
The Forward Collision Warning (FCW) system can
provide the driver with active braking, audible and
visual warnings (within the instrument cluster display)
and may apply a brake jerk to warn the driver when it
detects a potential frontal collision. The warnings and
limited braking are intended to provide the driver with
enough time to react and avoid or mitigate the poten-
tial collision.
The system status can be selected to: "Off", "Only
Warning", and "Warning & Braking". "Warning & Brak-
ing" status with "Medium" sensitivity are the default
settings, but can be changed within the Uconnect
settings under "Safety and Driving Assistance".
FCW monitors the information from the forward-
looking sensor, as well as the Electronic Brake Control-
ler (EBC) and wheel speed sensors, to calculate the
probability of a collision. When the system determines
that a collision is probable, a warning message (both
audible and visual) will be displayed within the cluster
display along with a brake jerk warning (previously
enabled in the Uconnect Settings). When the system
senses the driver applying the brakes to avoid a prob-
able collision, additional brake force will be provided
to the vehicle. When the system determines a collision
with the vehicle in front of you is no longer probable,
the warning message will be deactivated.
NOTE:
The FCW feature can be customized and turned off
through the Uconnect System touchscreen.
For further information, and applicable warnings
and cautions, please refer to the Owner's Manual
at www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Canadian
Residents).
LaneSense — If Equipped
The LaneSense system uses a forward looking camera
to detect lane markings and measure vehicle position
within the lane boundaries. The LaneSense system is
operational at speeds above 37 mph (60 km/h) and
below 105 mph (169 km/h).
Turning LaneSense ON Or OFF
The LaneSense button is located on the switch panel
below the Uconnect display.
LaneSense Button
Advertisement
Table of Contents
