Scrub Controls - Windsor Chariot 3 Operating Instructions Manual

Hide thumbs Also See for Chariot 3:
Table of Contents

Advertisement

Operations

Scrub Controls

1. Function Mode Dial
The first two positions are for transport only. See drive controls section.
A1 - Daytime cleaning/light cleaning
This mode is used for light cleaning. In this mode the machine will propel at a maximum of medium speed. The
scrub deck will automatically lower to a lower down pressure setting. The water will flow at a low rate. Water
will automatically shut off in neutral and restart when pressure resumes. The squeegee will automatically lower
and vacuum will flow at a slow rate. (Squeegee will continue to lower and the vacuum will continue to run in
neutral. The squeegee will raise in reverse.)
A2-Daytime Plus cleaining/light cleaning
This mode is used for light cleaning. In this mode the machine will propel at a maximum of medium speed. The
scrub deck will automatically lower to a lower down pressure setting. The water will flow at a low rate. Water
will automatically shut off in neutral and restart when pressure resumes. The squeegee will automatically lower
and vacuum will flow at a medium rate.
A3 - Medium scrub level cleaning
This mode is used for medium level cleaning. In this mode the machine will propel at a maximum of medium.
The scrub deck will lower at a medium down pressure. The water will flow at a medium rate. The vacuum will
flow at a medium rate.
18
c
86367610 Chariot CS26
2
1

Advertisement

Table of Contents
loading

Table of Contents