Windsor CV86LI Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Windsor Manuals
  4. Vacuum Cleaner
  5. CV86LI
  6. Operating instructions manual

Windsor CV86LI Operating Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Chariot 3 - CV 86/1 RS Bp
Vacuum
Operating Instructions (ENG)
Models:
CV86
1.012-596.0
CVC86
1.012-597.0
CVI86
1.012-600.0
CV86LI
1.012-601.0
86413740-E
09/13/18

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CV86LI and is the answer not in the manual?

Questions and answers

Related Manuals for Windsor CV86LI

Summary of Contents for Windsor CV86LI

  • Page 1 Chariot 3 - CV 86/1 RS Bp Vacuum Operating Instructions (ENG) Models: CV86 1.012-596.0 CVC86 1.012-597.0 CVI86 1.012-600.0 CV86LI 1.012-601.0 86413740-E 09/13/18...

  • Page 2: Machine Data Label

    Machine Data Label Overview The Chariot® CV86 is a battery powered, stand-on, wide area vacuum intended for commercial use. The Chariot® CV86 brushes and vacuums debris from the floor and stores it in the debris tray and vacuum bag. Warranty Registration Thank you for purchasing a Kärcher North America product.

  • Page 3: Table Of Contents

    Table of Contents Machine Data Label ......2 Remove Brush Deck ......38 Overview .

  • Page 4: How To Use This Manual

    How To Use This Manual This manual contains the following sections: The SAFETY section contains important information regarding hazardous or unsafe practices of the • How to Use This Manual machine. Levels of hazards are identified that could • Safety result in product damage, personal injury, or severe •...

  • Page 5: Safety

    Safety Safety Label Locations These drawings indicate the location of safety labels on the machine. If at any time the labels become illegible, promptly replace them. EMPLACEMENT DE L'ÉTIQUETTE DE SÉCURITÉREMARQUE : Ces dessins indiquent l'emplacement des étiquettes de sécurité sur la machine. Si, à tout moment, les étiquettes deviennent illisibles, contactez votre représentant autorisé...

  • Page 6: Important Safety Instructions

    Safety IMPORTANT SAFETY INSTRUCTIONS When using this machine, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. To reduce the risk of fire, electric shock, or injury: Use only indoors. Do not use outdoors or expose to rain. Use only as described in this manual.
  • Page 7 Safety MESURES DE SÉCURITÉ IMPORTANTES Lors de l'utilisation d'un appareil à batteries, il est nécessaire de respecter systématiquement des mesures de sécurité de base, comme suit: PRENEZ NOTE DE TOUTES CES MESURES AVANT D'UTILISER CETTE MACHINE. Pour réduire les risques d'incendie, de chocs électriques, ou de blessures: N'utiliser cette machine qu'en intérieur.

  • Page 8: Hazard Intensity Level

    Safety The following symbols are used throughout this guide as indicated in their descriptions: HAZARD INTENSITY LEVEL There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions: WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.
  • Page 9 Safety Les symboles ci-dessous sont utilisés à travers ce manuel comme illustré dans leurs descriptions: DEGRÉS DE RISQUES EN CAS DE DANGER Il existe trois degrés de risques identifiés par les termes signalétiques -AVERTISSEMENT et ATTENTION et POUR VOTRE SÉCURITÉ. Le degré de risque est défini de la manière suivante: AVERTISSEMENT - Dangers ou méthodes dangereuses qui POURRAIENT provoquer de graves blessures ou entraîner la mort.

  • Page 10: Operations

    Operations Technical Specifications ITEM DIMENSION/CAPACITY Nominal Power 1600 W Rated Voltage 36 Volts DC Rated Amperage 43 Amps Batteries 3 X 12 Volt 205-234 @ 20 hr. rate Battery Compartment Dimensions 21in. X 16in. X 17in. (533mm X 406mm X 432mm) Battery, Lithium 38.4 Volts Battery, Lithium - Dimensions...
  • Page 11 Operations ITEM MEASURE Height 50.0 inches (1270 mm) Length 52.1 inches (1323 mm) Width without deck 30.6 inches (777 mm) Width of deck 31.9 inches (811mm) Width with side broom 34.2 inches (869 mm) WIDTH LENGTH WITH SIDE BROOM HEIGHT This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

  • Page 12: How This Machine Works

    Operations How This Machine Works The function of the operator control system is to control the direction and speed of the machine. The directional The Chariot® CV86 is a battery powered, self- control system consists of the direction control drive propelled, vacuum intended for commercial use.

  • Page 13: Components

    Operations UNDER LID Components 6. Cover Lid 1. Control Panel - Drive 7. Brush Deck 2. Control Panel - Vacuum 8. Vacuum Bag 3. Pedal Platform 9. Side Broom 4. Rear Cover 5. Cover 8.641-374.0 operator’s manual - chariot 3 - cv86/1 rs bp...
  • Page 14 Operations LOWER CONTROL PANEL 8.641-374.0 operator’s manual - chariot 3 - cv86/1 rs bp...

  • Page 15: Controls

    Operations Controls 1. Key Switch 2. Emergency Stop Switch 3. Directional Control / Drive Reset Switch 4. Throttle Pedal 5. Horn Button 6. Steering Wheel 7. Function Mode Switch 8. Battery Discharge Indicator 9. Hour Meter 10. Vacuum System Status Indicator 11.
  • Page 16 Operations 4. Throttle Pedal Controls the speed of the vehicle within the speed control setting selected. Pressing the pedal causes the machine to travel in the direction selected by the Directional Control Switch. To increase speed, increase pressure on the pedal. To decrease speed, decrease pressure on the pedal.
  • Page 17 Operations Slow Transport This mode is used for machine transport. In this mode the machine will propel at slow speed. The 'floating' brush deck and side broom are in the up position. The brushes, side broom, and vacuum are off. Fast Transport This mode is used for machine transport.
  • Page 18 Operations 8. Battery Charge Level Indicator Indicates the charge level of the batteries. The meter display is divided into 10 bars. Bars illuminated on the far right indicate full charge. Bars flashing near the left side indicate the batteries should be recharged. Further operation of the machine could damage the machine or the batteries.

  • Page 19: Pre-Run Machine Inspection

    Operations Machine Operation Emergency Stop Procedures 1. Push in emergency stop button. This will engage Pre-Run Machine Inspection the brake and cause the machine to stop immedi- ately. Do a pre-run inspection to find possible problems that could cause poor performance or lost time from break- down.

  • Page 20: Normal Vacuuming

    Operations Normal Vacuuming To Begin Vacuuming Plan the vacuuming pattern in advance. The longest track is around the perimeter of the area to be cleaned. For efficient operation, the runs should be the longest When operating the machine around people, pay possible without turning or stopping.

  • Page 21: To Stop Vacuuming

    Operations To Stop Vacuuming 7. Retrieve a new clean vacuum bag from the storage strap on the cover lid. 1. Remove foot from throttle pedal allowing pedal to return to neutral. 2. Turn machine power off or switch to transport only mode.
  • Page 22 Notes 8.641-374.0 operator’s Manual - chariot 3 - cv86/1 RS bp...

  • Page 23: Maintenance

    Maintenance Service Schedule BEFORE AFTER EACH MAINTENANCE EACH WORK WORK 50 HRS 100 HRS 200 HRS PERIOD PERIOD Check water level of batteries after charging; add distilled water if necessary (Wet cell only) Check that the vacuum box lid seals tightly Check for damaged or worn tires.

  • Page 24: Batteries

    Maintenance Batteries 1. Rear Cover Latch 2. Rear Cover 3. Battery Connector-Machine 4. Battery Connector-Battery 5. Batteries 6. Battery Tray Liner 7. Battery Tray 8. Batteries - Lithium Option 8.641-374.0 operator’s manual - chariot 3 - cv86/1 rs bp...
  • Page 25 Maintenance Batteries (Wet Cell Only) The batteries provide the power to operate the Wear eye protection and protective clothing when machine. The batteries require regular maintenance to working with batteries. keep them operating at peak efficiency. The machine batteries will hold their charge for long periods of time, but they can only be charged a certain number of times.

  • Page 26: Charging Batteries

    Maintenance Checking Battery Specific Gravity Charging Batteries Use a hydrometer to check the battery specific gravity. When servicing machine, avoid contact with battery acid. Lors de l'entretien de la machine, évitez tout contact avec l'acide de batterie. Batteries emit hydrogen gas. Explosion or fire can result.

  • Page 27: External Charger

    Maintenance External Charger 8. (Wet Cell Only) Check the electrolyte level. It should be up to the indicator ring. If necessary, add Use a 36 volt, 20 amp maximum output DC charger distilled water. Install the battery caps. which will automatically shut off when the batteries are 9.

  • Page 28: Changing Batteries

    Maintenance Changing Batteries Stop the machine in a clean area next to the charger. Turn off machine. FOR SAFETY: Before leaving or servicing the machine; stop on level surface, turn off machine and remove key. 1. Remove the rear cover. 2.

  • Page 29: Battery Charger Programming

    Maintenance Onboard Charger (Optional) 4. Replace charger label and lower charger back into cover. Tighten four nuts to secure charger to mounting bracket. Circuit Breaker must be off before unplugging batteries or connecting the charger AC plug to a wall outlet. Le disjoncteur doit être coupé...

  • Page 30: Lithium Battery (Optional)

    Maintenance Lithium Battery (Optional) This product must be recycled and is made of recycled products Chemical Risk Lithium batteries are chemical risk if mis-operated, mishandled or abused. Les batteries au lithium présentent un risque chimique si elles sont mal utilisées, manipulées incorrecte- ment.

  • Page 31: Operating Limits

    Maintenance Transportation If the battery is not installed in equipment, it must be transported in the original package or equivalent. Batteries are tested according to UN Handbook of Tests and Criteria, part III, sub section 38.3 (ST/SG/AC. 10/11/ Rev.5). For transport, the batteries belong to category UN3480, Class 9, Packaging Group II. Operating Limits The battery should not be operated outside these operating limits: Operating Limits...

  • Page 32: Handling

    Maintenance Handling • Install and secure new battery. Be careful not to ground the terminals to any metal mounting, fixture, or body part • Connect battery cables. Connect ground cable last to avoid sparks Read Safety Section before installing the battery. •...

  • Page 33: Charging

    Maintenance Charging Discharging • Turn on battery. Before operating the charger make sure to read and • Turn on load understand the instructions that come with the charger. NOTE: Do not discharge battery below Never attempt to charge a battery without first recommended minimum operating voltages.

  • Page 34: Service & Maintenance

    Maintenance Troubleshooting CORRECTIVE ACTIONS Battery Won’t Turn On: Stop discharge or charge High Temperature Leave the battery to cool Does the battery turn on for a short Low Temperature Stop discharge or charge Symptom time, then turn itself off? High Voltage If charging, stop charge The battery is likely in a low voltage or Do not discharge the battery.
  • Page 35 Maintenance Changing Battery Recycling and Disposal Stop the machine in a clean area. Turn off machine. Batteries must not be mixed with domestic or industrial waste. Discover’s Advanced Energy Systems are FOR SAFETY: Before leaving or servicing the recyclable and must be processed through a machine;...

  • Page 36: Brush Deck

    Maintenance Brush Deck 1. Brush Deck 2. Brush Release Clips 3. Brush Motor 4. Brush Deck Lift Actuator 5. Side Broom 8.641-374.0 operator’s manual - chariot 3 - cv86/1 rs bp...

  • Page 37: Brush Removal & Bearing Cleaning

    Maintenance Brush Removal & Bearing Cleaning Side Broom Removal NOTE: The brushes should wear evenly side to side. 1. Remove cotter and clevis pins from side broom Brushes should be replaced as a set when bristle assembly. length wears to height of yellow PerformAlert™ 2.

  • Page 38: Remove Brush Deck

    Maintenance Remove Brush Deck Brush Deck Actuator Removal/ Replacement 1. Lower brush deck. FOR SAFETY: Before leaving or servicing 2. Turn off machine. machine, stop on a level surface. Turn off 3. Disconnect brush motor power cable. machine. 4. Disconnect vacuum hose from debris tray. 1.

  • Page 39: Deck Actuator Adjustment

    Maintenance Deck Actuator Adjustment The actuator will need to be adjusted when replaced. Do not use a pressure washer to clean around the To adjust the actuator: brush motors. Use tap pressure only. 1. While holding the actuator barrel to prevent it from spinning, apply power to the actuator such that it is fully extended.

  • Page 40: To Remove Vacuum Motor

    Maintenance COVER LID COVER LID VACUUM BAG BAG SUPPORT BAG SUPPORT BAG SUPPORT BRACKET VACUUM PLATE VACUUM HOSE CLAMP VACUUM MOTOR ASSEMBLY 5. Loosen hose clamp, then disconnect hose from assembly. 6. Disconnect vacuum motor cables. Disconnect batteries before working on machine. Only qualified personnel should work inside machine.

  • Page 41: Circuit Protection

    Maintenance Circuit Protection Circuit Breakers 1. MAIN CIRCUIT BREAKER Interrupts the flow of power from batteries in the event of an electrical overload. When the circuit breaker is tripped, it can be reset by pressing the toggle switch. If the circuit breaker continues to trip, the cause of the electrical overload must be corrected.

  • Page 42: Drive Motor

    Maintenance Drive Motor 1. Drive Motor 2. Brake 8.641-374.0 operator’s manual - chariot 3 - cv86/1 rs bp...

  • Page 43: Electric Brake Engagement

    Maintenance Electric Brake Engagement Drive Motor Carbon Brush Replacement FOR SAFETY: Before leaving or servicing machine, stop on a level surface, turn off machine and remove key. Do not use a pressure washer to clean around the Electric Brake Engagement motors.

  • Page 44: Transporting

    Maintenance Transporting Trailer Loading/Unloading Brush deck must be in the up position before loading. Pushing Machine Once loaded, lower brush deck, turn off machine, and The machine may be pushed for short distances at ensure brake is engaged. Block the tires to prevent the speeds not to exceed 5 mph.

  • Page 45: Troubleshooting

    Maintenance Troubleshooting PROBLEM CAUSE SOLUTION Check all battery cable connections; No power to machine Battery disconnected replace or tighten as necessary. Emergency shut-off activated Reset Faulty key switch Replace switch Battery cables corroded Clean connections On board charger plugged in Unplug and stow cord Main circuit breaker tripped Reset circuit breaker...
  • Page 46 Maintenance Troubleshooting PROBLEM CAUSE SOLUTION Poor brushing performance Debris caught in brushes Remove debris Worn brushes Replace brushes Low battery charge Charge batteries Brush deck goes down, then Check wire connections and actuator, Faulty actuator circuit or actuator raises replace or tighten as necessary. Debris tray needs to be emptied Excessive amounts of large or heavy Remove debris tray insert...

  • Page 47: Controller Fault Codes

    Maintenance Controller Fault Codes ERROR CODE PROBLEM SOLUTION DELUXE THE BATTERY NEEDS CHARGING OR THERE IS A BAD TRACTION MOTOR AND CONNECTION FROM THE BATTERY TO THE TRACTION CONTROLLER ERROR CONTROLLER. CHARGE BATTERY OR CALL FOR SERVICE AND HAVE TECHNICIAN CHECK WIRING. TRACTION MOTOR THE TRACTION MOTOR HAS A BAD CONNECTION.

  • Page 48: Suggested Spare Parts

    Suggested Spare Parts 8.641-374.0 Operators Manual - Chariot 3 - CV 86/1 RS Bp...
  • Page 49 Notes 8.641-374.0 Operators Manual - Chariot 3 - CV 86/1 RS Bp...
  • Page 50 Spare Parts List CV86 1.012-596.0 CVC86 1.012-597.0 CVI86 1.012-600.0 CV86LI 1.012-601.0 Chariot 3 - CV 86/1 RS Bp 86413750-AB 03/25/19...
  • Page 51 Table of contents CHARIOT 3 CV 86/1 RS Bp (ALL MODELS) 10 GRP, MAIN HOUSING, CV86 20 GRP, FRAME, CV86 30 GRP, FRONT DRIVE, CS26 40 GRP, STEERING, CV86 50 GRP, PLATFORM, CV86 60 GRP, CONTROL LOWER, CV86 70 GRP, CONTROL UPPER, CV86 80 GRP, VACUUM, CV86 90 GRP, BUMPER BLK, CV86 100 GROUP, LABEL CV86...

  • Page 52: Chariot 3 Cv 86/1 Rs Bp (All Models)

    CHARIOT 3 CV 86/1 RS Bp (ALL MODELS) Description Quantity Unit Remark GRP, MAIN HOUSING, CV86 1.000 1.012-596.0,1.012-600.0 AND 1.012-601.0 GRP, FRAME, CV86 1.000 GRP, FRONT DRIVE, CS26 1.000 GRP, STEERING, CV86 1.000 GRP, PLATFORM, CV86 1.000 GRP, CONTROL LOWER, CV86 1.000 GRP, CONTROL UPPER, CV86 1.000...

  • Page 53: Grp, Main Housing, Cv86

    10 GRP, MAIN HOUSING, CV86 Valid on 03.25.2019 Page 3 / 52...
  • Page 54 10 GRP, MAIN HOUSING, CV86 Article no. Description Quantity Unit Remark Foot note text 8.640-943.0 STRAP, BAG STORAGE 1.000 8.640-899.0 LID, CV86, TRIMMED 1.000 8.640-893.0 HOSE, VAC, 2.5 X 45.0 1.000 8.640-873.0 GASKET, LOWER VAC SEAL 1.000 8.640-866.0 SHAFT, .25 X 15.3, SS 1.000 8.640-865.0 GASKET, VACUUM ADAPTER...

  • Page 55: Grp, Frame, Cv86

    20 GRP, FRAME, CV86 Valid on 03.25.2019 Page 5 / 52...
  • Page 56 20 GRP, FRAME, CV86 Valid on 03.25.2019 Page 6 / 52...
  • Page 57 20 GRP, FRAME, CV86 Valid on 03.25.2019 Page 7 / 52...
  • Page 58 20 GRP, FRAME, CV86 Article no. Description Quantity Unit 8.640-368.0 FRAME, CV86 1.000 8.636-071.0 ASM, WHEEL GUARD 1.000 8.635-819.0 GLIDE, BATTERY TRAY 2.000 8.635-795.0 PAD, TIP 2.000 8.627-607.0 SCREW, 5/16-18 X .75 CARR SS 6.000 8.627-689.0 SCREW, 5/16-18 X .75 PHTRHMS SS 6.000 8.627-649.0 SCREW, 5/16-18 X .625 HHCS SS...

  • Page 59: Grp, Front Drive, Cs26

    30 GRP, FRONT DRIVE, CS26 Valid on 03.25.2019 Page 9 / 52...
  • Page 60 30 GRP, FRONT DRIVE, CS26 Article no. Description Quantity Unit 8.636-614.0 SCREW, M10-1.25 X 25 HWHCS 4.000 8.636-613.0 SCREW, 3/8-16 X 1 HWHCSSERFLG GR8 4.000 8.636-413.0 ASM, SHAFT DRIVE MOTOR 1.000 8.636-107.0 BRKT, WIRING, DRIVE UNIT 1.000 8.635-787.0 ASM, BEARING BLOCK, FRT DRIVE 1.000 8.635-712.0 DRIVE WHEEL, 36VDC...

  • Page 61: Grp, Steering, Cv86

    40 GRP, STEERING, CV86 Valid on 03.25.2019 Page 11 / 52...
  • Page 62 40 GRP, STEERING, CV86 Article no. Description Quantity Unit 8.640-863.0 CHAIN, 12.7MM PITCH, 102 ROLLER 1.000 8.640-392.0 BRKT, STEERING 1.000 8.636-725.0 WASHER, .344 X 1.13 X .09 SS 1.000 8.636-137.0 ASM, TENSIONER PLATE 1.000 8.636-121.0 SCREW, 3/8-16 X .625 SCHCS STL BLKOX 1.000 8.636-031.0 NUT, 1/4-20 FLG NYLOCK SS...

  • Page 63: Grp, Platform, Cv86

    50 GRP, PLATFORM, CV86 Valid on 03.25.2019 Page 13 / 52...
  • Page 64 50 GRP, PLATFORM, CV86 Valid on 03.25.2019 Page 14 / 52...
  • Page 65 50 GRP, PLATFORM, CV86 Valid on 03.25.2019 Page 15 / 52...
  • Page 66 50 GRP, PLATFORM, CV86 Article no. Description Quantity Unit Foot note text 8.639-967.0 PLATFORM, OPERATOR, BLK 1.000 8.633-424.0 PEDAL, HEEL, BLK 1.000 8.633-469.0 PEDAL, ACCELERATOR, YEL 1.000 8.636-117.0 PIN, DOWEL, 1/4 X 3.125 STL 1.000 8.627-917.0 WASHER, 10 FLT 7.000 8.617-298.0 SCREW, KA50 X 10 OVHCS STL WN1412 ZNPLT 10.000...
  • Page 67 50 GRP, PLATFORM, CV86 Article no. Description Quantity Unit Foot note text 8.622-432.0 SPACER, .63 OD X .385ID X .64L 4.000 8.623-213.0 Cap 2.75 ID X 1.0 L BLK VINYL 2.000 OPTION 8.636-002.0 PLATE, BATTERY STOP 2.000 8.627-762.0 SCREW, 8-32 X .5 HHCS SS 2.000 8.616-180.0 LATCH &...

  • Page 68: Grp, Control Lower, Cv86

    60 GRP, CONTROL LOWER, CV86 Valid on 03.25.2019 Page 18 / 52...
  • Page 69 60 GRP, CONTROL LOWER, CV86 Valid on 03.25.2019 Page 19 / 52...
  • Page 70 60 GRP, CONTROL LOWER, CV86 Article no. Description Quantity Unit 8.640-976.0 CONTROLLER, I-DRIVE, CV34 1.000 8.642-354.0 KIT, PCB REPLACEMENT, CV86 TELEMATICS 1.000 8.640-867.0 GASKET, .188 X .25 X 30.0 1.000 8.640-366.0 PANEL, LOWER CONTROL, CV34 1.000 8.636-948.0 BRKT, CABLE ATTACHMENT 1.000 8.636-902.0 BREAKER, 60 AMP 2-POLE...

  • Page 71: Grp, Control Upper, Cv86

    70 GRP, CONTROL UPPER, CV86 Valid on 03.25.2019 Page 21 / 52...
  • Page 72 70 GRP, CONTROL UPPER, CV86 Valid on 03.25.2019 Page 22 / 52...
  • Page 73 70 GRP, CONTROL UPPER, CV86 Article no. Description Quantity Unit Remark 8.640-367.0 PANEL, UPPER CONTROL, CV34 1.000 8.636-259.0 SWITCH, SPDT 3 POSN MON, ARROW 1.000 8.635-844.0 O-RING, 4MM ID, 1.5MM THK, BUNA-N 2.000 8.635-843.0 SCREW, M4 X 12 FLHMS SS ISO7046 NP 2.000 8.635-487.0 SWITCH, ROTARY...

  • Page 74: Grp, Vacuum, Cv86

    80 GRP, VACUUM, CV86 Valid on 03.25.2019 Page 24 / 52...
  • Page 75 80 GRP, VACUUM, CV86 Article no. Description Quantity Unit 8.641-435.0 BRKT, BAG SUPPORT 1.000 8.640-936.0 GASKET, .25 X .50 X 35.0 1.000 8.640-898.0 SPACER, .255 X .750 X .500, NYL 3.000 8.640-897.0 SPACER, .255 X .437 X .500, NYL 2.000 8.640-875.0 GASKET, 5.80 X 6.60 X .38 1.000...

  • Page 76: Grp, Bumper Blk, Cv86

    90 GRP, BUMPER BLK, CV86 Valid on 03.25.2019 Page 26 / 52...
  • Page 77 90 GRP, BUMPER BLK, CV86 Article no. Description Quantity Unit 8.639-964.0 BUMPER, RIGHT, BLK 1.000 8.636-196.0 SCREW, 5/16-18 X 3 PHTRHMS SS 2.000 8.636-195.0 SCREW, 5/16-18 X 2 PHTRHMS SS 2.000 8.635-899.0 BUMPER, LEFT, BLACK 1.000 8.627-689.0 SCREW, 5/16-18 X .75 PHTRHMS SS 2.000 Valid on 03.25.2019 Page 27 / 52...

  • Page 78: Group, Label Cv86

    100 GROUP, LABEL CV86 (0.250-110.0) Valid on 03.25.2019 Page 28 / 52...
  • Page 79 Remark 8.640-921.0 LABEL, YELLOW MAINTENANCE 3.000 8.640-919.0 LABEL, IVAC-34, SIDE, LEFT 1.000 8.640-918.0 LABEL, IVAC-34, SIDE, RIGHT 1.000 8.639-540.0 LABEL, WINDSOR LOGO DOMED 1.000 8.636-294.0 LABEL, BATTERY CABLING 1.000 EXCEPT CV86LI 8.642-863.0 LABEL, WARNING, LITHIUM 1.000 CV86LI ONLY 8.639-541.0 LABEL, CS26, CONTROL, LEFT 1.000...

  • Page 80: Grp, Deck Lift, Cv86

    110 GRP, DECK LIFT, CV86 Valid on 03.25.2019 Page 30 / 52...
  • Page 81 110 GRP, DECK LIFT, CV86 Valid on 03.25.2019 Page 31 / 52...
  • Page 82 110 GRP, DECK LIFT, CV86 Valid on 03.25.2019 Page 32 / 52...
  • Page 83 110 GRP, DECK LIFT, CV86 Valid on 03.25.2019 Page 33 / 52...
  • Page 84 110 GRP, DECK LIFT, CV86 Article no. Description Quantity Unit 8.640-439.0 BRACKET, MOUNT, ACTUATOR 1.000 8.640-436.0 MOUNT, ACTUATOR 1.000 8.640-433.0 BRACKET, CROSSBAR, DECK 1.000 8.640-431.0 PLATE, LIFT, SPRING 1.000 8.640-427.0 PLATE, DECK ARM 2.000 8.636-544.0 PIN, CLEVIS 5/16 X 2.25 STL ZNPLT 2.000 8.636-172.0 BRKT, ACT SPGS, DECK, CS26...
  • Page 85 110 GRP, DECK LIFT, CV86 Article no. Description Quantity Unit 8.622-899.0 BUSHING, .314 X .502 X .375 FLG BRZ 2.000 8.640-467.0 BRUSH, 13 IN, NYLON, BLK 1.000 8.632-247.0 MOTOR, 36VDC, 90 DEG. 1/16 HP 1.000 8.640-432.0 BRACKET, MOUNT, SIDE BROOM 1.000 8.641-199.0 SCREW, M6X1.0 X 16 TBTNHMS STL BLK ZNPLT...

  • Page 86: Grp, Brush Deck, Cv86

    120 GRP, BRUSH DECK, CV86 Valid on 03.25.2019 Page 36 / 52...
  • Page 87 120 GRP, BRUSH DECK, CV86 Article no. Description Quantity Unit 8.634-131.0 BRKT, BRUSH DECK PIVOT 2.000 8.637-048.0 SLEEVE, 17SH 4.09", HYTREL, GRN 1.000 8.641-430.0 PLATE, COUNTERBALANCE 2.000 8.637-047.0 HUB, COUPLING, 18ES 1/2" D-BORE 2.000 8.634-319.0 GSKT, 1.6THK X 9.5W X 60L 2.000 8.601-063.0 WASHER, 1/4 SS...

  • Page 88: 1000 Grp, Drive, Brush Deck (8.634-388.0)

    1000 GRP, DRIVE, BRUSH DECK (8.634-388.0) Valid on 03.25.2019 Page 38 / 52...
  • Page 89 1000 GRP, DRIVE, BRUSH DECK (8.634-388.0) Article no. Description Quantity Unit Serial number from Remark 8.634-387.0 HOUSING ASM, BRUSH DRIVE 1.000 8.634-386.0 BELT, TWIN 5MM GT2, 15W, 130T 1.000 8.634-385.0 PULLEY, 32T 5MM GT, 15W 2.000 8.634-384.0 PULLEY, 18T 5MM GT, 15W 1.000 8.634-383.0 PULLEY ASM, 22T 5MM GT, 15W...

  • Page 90: 1010 Grp, Debris Tray, 28" (8.640-580.0)

    1010 GRP, DEBRIS TRAY, 28" (8.640-580.0) Valid on 03.25.2019 Page 40 / 52...
  • Page 91 1010 GRP, DEBRIS TRAY, 28" (8.640-580.0) Article no. Description Quantity Unit 8.641-402.0 MOUNT, DEBRIS TRAY, TRIMMED 1.000 8.641-015.0 GASKET, DEBRIS BIN 2.000 8.640-876.0 CLIP, DEBRIS TRAY SPRING 1.000 8.640-411.0 INSERT, DEBRIS BIN 1.000 8.601-499.0 SCREW, M5-.8 X 20 SCHCS SS DIN912 1.000 8.634-240.0 GASKET, DEBRIS TRAY, END...

  • Page 92: Grp, Battery Exchange Lock

    140 GRP, BATTERY EXCHANGE LOCK Valid on 03.25.2019 Page 42 / 52...
  • Page 93 140 GRP, BATTERY EXCHANGE LOCK Article no. Description Quantity Unit 8.636-004.0 BATTERY STOP, LEFT 1.000 8.636-005.0 BATTERY STOP, RIGHT 1.000 8.631-967.0 SLEEVE, BEARING 2.000 8.636-376.0 PLATE, SHIM .030" THICK 2.000 8.601-067.0 WASHER, 5/16 FLT SS 4.000 8.600-702.0 SCREW, 5/16-18 X 1.25 HHCS SS NP 2.000 8.627-919.0 WASHER, 10 FLT STL ZNPLT...

  • Page 94: Grp, Battery Exchange Cart

    150 GRP, BATTERY EXCHANGE CART Valid on 03.25.2019 Page 44 / 52...
  • Page 95 150 GRP, BATTERY EXCHANGE CART Valid on 03.25.2019 Page 45 / 52...
  • Page 96 150 GRP, BATTERY EXCHANGE CART Article no. Description Quantity Unit 8.635-945.0 BRKT, SPRING COVER, CART 1.000 8.635-940.0 BRKT, TRAY CATCH 1.000 8.635-939.0 BRKT, BACK, CART 1.000 8.635-938.0 ASM, FRAME, BATTERY CART 1.000 8.635-819.0 GLIDE, BATTERY TRAY 2.000 8.627-747.0 SCREW, 5/16-18 X 1.5 CARR SS 2.000 8.627-679.0 SCREW, 5/16-18 X 1.75 HHCS SS...
  • Page 97 150 GRP, BATTERY EXCHANGE CART Article no. Description Quantity Unit 8.625-942.0 WASHER, .510 X 1 THR 6.000 8.625-941.0 WASHER, .51 X 10 X .063 THR 4.000 8.625-940.0 WASHER, .51 THR 4.000 8.625-428.0 WASHER, .321 X 1 X .375 NYL BLK 4.000 8.623-115.0 BUSHING, .314 X .502 X .625 FLG...
  • Page 98 160 Wiring-Batteries Valid on 03.25.2019 Page 48 / 52...
  • Page 99 Quantity Unit Remark 8.642-976.0 Fuse 150A lithium 36V 12-36-6700 1.000 CS26LI 8.622-843.0 BATTERY, 12V AGM 234AH 3.000 EXCEPT CV86LI 8.628-341.0 BATTERY, 12V, 225AH (J185H-AC) 3.000 EXCEPT CV86LI 8.622-841.0 BATTERY 12V 205AH 3.000 EXCEPT CV86LI 8.627-398.0 SCREW, 10-32 X .75 PHPNHMS SS 1.000...
  • Page 100 160 Wiring-Batteries Article no. Description Quantity Unit Remark 8.600-683.0 SCREW, 10-32 X 1 PHPNHMS STL ZNPLT 1.000 CV86LI Connector SB175 yellow without terms 1.000 CS26LI Valid on 03.25.2019 Page 50 / 52...
  • Page 115 170 CV86 Serial Numbers Serial Number REF. MODEL: SERIAL # 10061510000847,10061530000110,10061590000259,10061610000042,10061680000482, 10061790000064,10125970000048 10125960000037, 10125970000201, 1012600000062 10126010000011 Valid on 03.25.2019 Page 51 / 52...
  • Page 116 170 CV86 Serial Numbers Description Quantity Unit SERIAL NUMBER PAGE 1.000 Valid on 03.25.2019 Page 52 / 52...

This manual is also suitable for:

Cv 86/1 rs bpCv86Cvc86Cvi86Chariot 3

Table of Contents