Dn Setting - Toshiba RBC-AWSU52-UL Installation Manual

■9.

DN setting

Detailed data of various models of air conditioner can be set.
REQUIREMENT
Be sure to stop operation of the air conditioners.
NOTE
For details on codes and data to be set, refer to the Installation Manual and Service manual of the indoor unit and outdoor unit.
1
In the "Field setting menu" screen, press
[ ] and [
then press [
2
Press [ ] and [
or "Outdoor unit", and the press [
Fix]
 If "Indoor unit" was selected, the fans and louvres of
the indoor units operate.
When doing group connections:
 The fans and louvres of the selected indoor units
operate.
3
Press [ ] to black highlight the code (DN),
and then press [
code
4
Press [ ] to black highlight the data, and
then press [
5
After finishing setting the data of the code
(DN), press [
 "Continue?" is displayed.
6
To set the data of other codes (DN), press
[ Set/Fix]
To not do other settings, press [
 The changes are fixed, and the "Field setting menu"
screen returns.
 " " appears while data is changing.
When doing group connections:
 Press [
In the unit selection screen, press [
briefly display " ", and then return to the "Field
setting menu" screen.
– 37 –
Installation Manual
] to select "DN setting", and
Set/Fix]
] to select "Indoor unit"
] and [ ] to set the
] and [ ] to set the data
Set/Fix]
Return] to open the unit selection screen.
Set/
Return]
Return] to