Table of Contents
Advertisement
7
Field setting menu
Item
1. Test mode
2. Register service info.
3. Alarm history
4. Address
5. Monitor function
6. Setting louver position
7. Setting timer operation mode
8. Easy I.DN setting
9. DN setting
10. Reset Power Consumption data
11. Notice history
12. Rotation backup
13. LC Easy monitor
14. Indoor unit operation
1
Press [
2
Press and hold [
same time to open "Field setting menu"
Press and hold 4 seconds.
3
Press [
4
Press [
The setting screen opens.
Does test operations after installation. (Page 23)
Registers contact for repairs, and model names and serial numbers of indoor units
and outdoor units. (Page 25)
Displays the last 10 check codes, and when and at which unit they occurred, as
the history of check codes. (Page 29)
Check addresses and manually set addresses. (Page 30)
Monitoring data of sensor temperature, rotating speed of the compressor or other
factor. (Page 34)
Disables operation to fix position to stop louvres when swing stops and shows
louvres' up-down display as right-left display on the main screen. (Page 34)
Settings can be done to you can select operation mode during "Schedule timer".
(Page 35)
Sets various functions related to air conditioners. (Page 36)
Advanced settings using DN codes. (Page 37)
Resetting the power consumption data saved in the remote controller.
Displays the last 10 notice codes, and when and at which unit they occurred, as
the history of notice codes. (Page 38)
Sets rotation backup operations for light commercial models using group
connections. (Page 39)
Check data, such as the sensor temperature on light commercial models.
(Page 40)
Forces operation of drain pump, fan / louvres of indoor units to check operations.
(Page 41)
– 22 –
Installation Manual
Menu] to open the "Menu"
Menu] and [
] and [
] to select an item
Set/Fix]
Description
] at the
EN
Advertisement
Table of Contents
