Table of Contents
Advertisement
■10.
Reset Power Consumption data
Power consumption data saved in the remote controller can be reset.
■11.
Notice history
Displays the last 10 notice codes, and at which unit and when they occurred.
NOTE
The notice history data shows a history of 10 occurrences. If the occurrences exceed 10, the oldest data is deleted.
Deleting notice history
REQUIREMENT
If you are using 2 remote controllers, delete the history at each remote controller.
1
Press [
] and [
Power Consumption data" on the "Field
setting menu" screen, then press [
Fix]
2
To reset the power consumption data, press
the [
Set/Fix]
Data is reset and the display returns to the
"Field setting menu" screen.
1
In the "Field setting menu" screen, press
[
] and [
and then press [
1
Press [
Menu] while the "Notice history"
screen is displayed
"Reset all notice data." is displayed.
2
Press [
Set/Fix]
– 38 –
Installation Manual
] to select "Reset
] to select "Notice history",
Set/Fix]
Set/
EN
Advertisement
Table of Contents
