Table of Contents
Advertisement
(1)
(2)
(3)
NOTE
Test mode ends 60 minutes after test mode was started, and the main screen returns.
Use Monitor function in the Test mode screen
NOTE
• "Monitor function" can display the values for 1 item at a time, such as sensor temperatures. (Page 34)
"LC Easy monitor" displays summaries of values, such as the sensor temperatures of light commercial models. (Page 40)
(Cannot be used for VRF models.)
• In a group connection, after a selection in the unit selection screen, the Monitor screen opens. Refer to the pages that
describe the various function for how to use the monitor functions.
2
Press [
ON/OFF]
Operation starts, and in test mode screen (1) opens.
(While stopped, it is screen (2))
Test mode is done while the operating mode is set to
"Cool" or "Heat".
The temperature cannot be set in test mode.
Check codes are displayed in the normal way.
3
After completing test mode, in the "Field
setting menu" screen, press [
to select "Test mode", and then press
[
Set/Fix]
Screen (3) appears.
Press [
Set/Fix] to end test mode and do normal
operation.
1
In the "Test mode" screen, press [
Fix]
2
Press [
] and [
function" or "LC Easy monitor", and the
press [
Set/Fix]
– 24 –
Installation Manual
] and [
]
Set/
] to select "Monitor
EN
Advertisement
Table of Contents
