Table of Contents
Advertisement
■12.
Summer time
Set summer time (Daylight saving time).
NOTE
• With "Shift time" set to "ON", when the time set in "Start date" comes the remote controller's internal clock advances an hour.
When the "End date" is reached, the clock returns to its original time.
• If summer time is "ON", then the following scheduled operations are executed after the shift at the times set.
"Schedule timer", "Night operation", and "Energy saving operation"
Scheduled operations set to occur during the 1 hour shift caused by "Start date" are not executed.
• The operating times of the following functions are not affected by the time change caused by summer time.
"Off timer", "On timer", "Off reminder timer", "Return back", "Occupancy sensor", "Rotation backup"
• When "Clock synchronisation" is set to "ON", then "Summer time" cannot be set.
■13.
Clock synchronisation
(Set whether to synchronize times with the central control
device)
(Only specifications of targeted central control devices)
You can set whether to synchronize the year, month, date, and time with the central control device.
■14.
Bluetooth
®
Refer to Bluetooth
function Owner's Manual.
1
In the "Initial setting" screen, press [
and [
] to select "Summer time", and then
press [
Set/Fix]
2
Press [
3
Press [
If you select "OFF", the setting is not done.
4
Press [
] and [
and "End date"
5
Press [
] and [
date, and time
6
Press [
Return to the "Initial setting" screen.
1
In the "Initial setting" screen, press [
and [
] to select "Clock synchronisation",
and then press [
2
Press [
"OFF"
3
Press [
NOTE
They are set to "ON" (synchronize clocks) as the factory
default setting.
– 21 –
Installation Manual
] and [
] to select "Shift time"
] to select "ON"
] to change "Start date"
] to change the month,
Set/Fix]
Set/Fix]
] and [
] to select "ON" or
Set/Fix]
]
]
Advertisement
Table of Contents
