BWI Eagle AIR-EAGLE XLT Product Information Bulletin

AIR-EAGLE
900 MHz RF Transmitter
MODEL 441-1200-AC
DESCRIPTION
The AIR-EAGLE XLT TX is an R.F. transmitter designed to send a
single stop command to any Air-Eagle XLT Receiver. The TX and RX
combine to create a long-range radio frequency system that operates
hazardous or hard-to-reach electrical apparatus from safe, convenient
locations of up to 2500 feet away (longer ranges can be achieved
using external antennas). This unit is user-programmable for up eight
network frequencies to allow multiple transmitters and receivers to
operate simultaneously in the same area without interference.
Note: This product is not designed for use in life-saving applications.
INSTALLATION
1. Mount the A -E XLT TRANSMITTER in a convenient location
IR AGLE
where the operator will have easy access to the stop button.
2. Install Ch. 2-4 wiring to contact input terminal strip if desired.
3. Install antenna onto connector on the right side of the enclosure.
4. Connect supplied power input cable to your external power source
TERMINAL STRIP WIRING
Wire as shown based on number of contact inputs
1 2 3 4 5
105 Bonnie Drive
Butler, PA 16002
724-283-4681
724-283-5939 (fax)
www.bwieagle.com
®
XLT
6 7 8 9
PRODUCT INFORMATION
Dimensions (with mounting plate) 6.3" L x 4.8" W x 4.3" H
CONTROLS & INDICATORS
PWR/TX LED
STOP Pushbutton
Inputs 2, 3 and 4
SPECIFICATIONS
AC Input
Transmit Data Channels
RF Output Power
Transmit Range
Note: Range figures are estimates, based on free-air terrain with limited sources of
interference. Actual range will vary based on transmitting power, orientation of
transmitter and receiver, height of transmitting antenna, height of receiving antenna,
weather conditions, interference sources in the area, and terrain between receiver and
transmitter, including, but not limited to, indoor and outdoor structures such as walls,
metal objects, trees, buildings, hills, and mountains
Transmit Frequency
RF Networks
Enclosure
Antenna Connection
Operating Temperature
10
APPROVALS
United States (FCC)
Canada (IC)
BULLETIN
Illuminates green continuously while power
is applied. Changes to red when transmitting
data.
Transmits CH1 RF "STOP" code to receiver
Independently transmit CH2, CH3 and CH4
codes to receiver
100-250 VAC, 5 W, 50/60 Hz
Four Dry Contact Input
250 mW
Up to 2500 Feet w/Standard Antenna
900MHz Spread Spectrum
Eight Independent Frequencies
Polycarbonate, IP66 (NEMA 4)
TNC Female
o o
-40 F to +185 F
MCQ-XB900HP
1846A-XB900HP