Editing A Numeric Value - Honeywell SmartLine ST 700 User Manual

5.4.1 Editing a Numeric value

Editing of a numeric value is a digit-by-digit process, starting with the left-most digit.

1. Press to begin the edit process:
•
The basic and standard display will display the current value of the item on the lower
line, left justified.
•
Basic Display: Press the  or  buttons to select the relevant digit, and then press
advance to the next digit to the right.
•
Standard Display: Press the  button to select the relevant digit, and then press
button simultaneously) to advance to the next digit on the right.
2. Basic and standard displays: After the last digit has been entered, press  one more time to
write the new value to the transmitter.
Page 76
ST 700 SmartLine Pressure Transmitters User's Manual

to

(both
Revision 13