INSTALLATION
Ceiling Mount
In combination with Dome-CH6
1. Drill the necessary holes in the wall at the desired installation position.
2. Hammer the 4 expansion bolts into the drilled holes.
3. Feed the power and BNC cable through the tube.
4. Fix the tube to the ceiling with four screws.
5. Screw the box (AK-29) into the other end of the tube, then tighten the screws on
the side of the tube.
6. Connect the power cable and the BNC cable to the camera cables and attach the
safety harness in the right place.
7. Make sure that the sealing rubber is seated in the sealing groove.
8. Align the dome camera with the positioning bolt of the housing and then turn
the camera to the correct position to fix it.
8