Initial Operation And Usage; Inserting The Batteries - Hilti PR 15 Operating Instructions Manual

3. Initial operation and usage

Inserting the batteries

Green flashing – low battery voltage
LED:
Steady red light, and laser off – battery discharged
Inserting new batteries
1 Turn lever A from the LOCK position to OPEN.
2 Remove cover from battery compartment.
3 Remove old batteries and dispose of them
correctly.
4 Insert new batteries, observing correct pole
alignment.
5 Replace cover and turn lever to LOCK position.
Always replace the complete set of batteries!
- Do not mix old and new batteries.
- Do not use batteries of different makes, or of
different types.
3. Initial operation and usage
63
A