Operation - Hilti PM 40-MG Operating Instructions Manual

Self-leveling time (typical)
Laser class
Line width (distance 5 m)
Self-leveling range
Operating status indicator
Power source
Battery life (all lines on)
Battery life (horizontal or vertical
lines on)
Operating temperature
Storage temperature
Dust and water spray protection
(except battery compartment)
Tripod thread
Beam divergence
Average output power (max.)
Weight including battery

5 Operation

CAUTION
Risk of injury! Do not direct the laser beam toward persons.
▶ Never look directly into the source of the laser beam. In the event of direct eye contact, close your
eyes and move your head out of the path of the laser beam.
5.1 Inserting the battery
▶ Push the battery in until it engages securely.
Note
Only the Li-ion batteries recommended by Hilti may be used to power the tool.
6 English
Printed: 07.09.2017 | Doc-Nr: PUB / 5343709 / 000 / 02
3 s
Class 2, visible, 510-660 nm (EN 60825-1:2008 / IEC 60825-
1:2007); Class II (CFR 21 § 1040 (FDA))
< 2.2 mm
±3.0° (typical)
Laser beams and the switch positions "Off", "On locked" and
"On unlocked"
Hilti B 12 Li-ion battery
Hilti B12 Li-ion battery, 2600 mAh, temperature +24 °C (+72 °F):
7 h (typical)
Hilti B 12 Li-ion battery, 2600 mAh, temperature +24 °C (+72
°F): 10 h (typical)
−10 ℃ ...40 ℃
−25 ℃ ...63 ℃
IP 54 in accordance with IEC 60529
BSW 5/8"UNC1/4"
0.05 mrad ...0.08 mrad
< 0.95 mW
1.24 kg