Nortel Communication Server 1000 Maintenance Manual page 61

Table 17
D-channel commands, LD 96 (cont'd.)
Command
ENL DCH x (FDL)
ENL MSGI x (options)
ENL MSGI <dch> debg CH <loop><channel>
ENL MSGI x FEAT CPNW
ENL MSGI <dch> debg MSG msg1 msg2 msg3
ENL MSGI <dch> debg SET
ENL MSGO x (options)
ENL MSGO <dch> debg CH <loop><channel>
ENL MSGO x FEAT CPNW
ENL MSGO <dch> debg MSG msg1 msg2 msg3
ENL MSGO <dch> debg SET
Copyright © 2003-2009 Nortel Networks
.
Description
Enable DCH x and attempt to establish the link, and force
download to MSDL.
Enable the monitoring of incoming messages on
D-channel x.
Enable the debugging of all monitored incoming
messages from D-channel card.
A maximum of 5 channels are monitored at a time. Only
one channel number can be entered in one command.
Enable incoming monitoring for the Network CPNW ISDN
messages on D-channel x.
Enable the debugging of all monitored incoming
messages from D-channel.
This command can be entered more than once. In one
command, only 3 message mnemonics can be given.
Enable debug SET on all incoming messages from
D-channel. This set-based filtering is enhanced for UIPE
proprietary messages.
Enable the monitoring of outgoing messages on
D-channel x.
Enable the debugging of all monitored outgoing messages
from D-channel card.
A maximum of 5 channels are monitored at a time. Only
one channel number can be entered in one command.
Enable outgoing monitoring for the Network CPNW ISDN
messages on D-channel x.
Enable the debugging of all monitored outgoing messages
from D-channel.
This command can be entered more than once. Only 3
message mnemonics can be given in one command.
Enable debug SET on all outgoing messages from
D-channel.
This set-based filtering is enhanced for UIPE proprietary
messages.
Nortel Communication Server 1000
ISDN Primary Rate Interface Maintenance
NN43001-717 03.01
11 May 2009
DCH commands (LD 96) 61