Select A Drawer; Starting A Cycle Wash - Omega ODD614X Instruction Manual

Program Water temp
(℃)
Wash (50℃)
Rinse
Rinse
Delicate Rinse (55℃)
Drying
NOTE:
AS/NZS 2007.1: This program is the test cycle. The information for comparability
test in accordance with AS/NZS 2007.1.

Select A Drawer

1. Close the drawer, press the Power button to switch on the machine.
2. Press the Drawer button to choose a drawer. After selecting a drawer, the response
light will turn on, and the corresponding drawer program, reservation, and other
information are displayed.
NOTE:
After selecting the drawer, all other buttons (except the power button) operate
only for the current drawer.

Starting A Cycle Wash

1. After selecting the drawer, press the Program button to select the required program.
2. Press the Start/Pause button, the dishwasher will start its cycle.
NOTE:
When the current drawer is running, you can press the drawer selection key to
switch to another drawer, and set and start the operation. Switch to the running
drawer after switching to the non-operating drawer after 5 seconds.
If two drawers are running at the same time,
This icon" "indicates the currently displayed drawer.
After that the washing cycle of one drawer is ended , meanwhile another cycle in
the other basket is still running, the display will continue to show the information
above the finished cycle for 5 minutes. After that the information shown will be
the one of the currently running cycle.
Detergent Running
required
Time
grams or
(min)
tablets
.
23 75g
85
1 piece
both drawer indicators light up.
29
Energy Water
Drying
usage usage
Time
(Kwh) (L)
(min)
25 0.45 8.5