Table of Contents
Advertisement
Install the kick plate
1. Prepare a kick plate as shown.
(The mounting hole position is measured by the machine at the factory state. If the height of the feet is
adjusted, the position of the mounting hole should be changed according to the actual situation.)
48.5
2. Set the insertion length of the kick plate and bend the bracket teeth with pliers.
3. Secure the brackets to the kick plate with screws and install the kick plate to the
bottom of the dishwasher.
Method A:
Side view
6 mm
clearance
min.10 mm
clearance
bracket
kick plate
595
498
Method B:
min.10 mm
clearance
16
Unit: mm
If you need to install the kick plate
inside, please cut the kick plate to
the appropriate height according
to the actual situation, and ensure
that the clearance between the
bottom surface of the kick plate
and the ground is at least 10 mm.
Advertisement
Table of Contents
