Table of Contents
Advertisement
Option B: Connecting to a standpipe
The standpipe must be a minimum diameter of 38 mm (1 1/2 inch) and requires a trap
for odor control.
Use the hose support clip to secure the hoses, ensure they do not enter the standpipe
more than 120 mm.
NOTE:
If there is surplus length of the drain hose it can be shortened. The Inlet Hose
cannot be shortened.
Whilst the very first wash cycle is operating, observe all pipe and hose connections
for leaks. Checking for any trace of water on the floor in the cavity where the
connections are after the first full cycle is a good practice.
120 mm maximum entry
Standpipe ∅38
mm minimum
19
Advertisement
Table of Contents
