Advertisement
4
Operating Instructions
I FEEL - To Ensure Comfort
The I FEEL feature enables the remote to act as
the temperature sensor and relay the current air
temperature of where the remote is physically
placed within the room. In some cases, this can
aid with reducing thermal drift between the set
temperature and the actual room temperature.
In order to activate this feature, press the
button, and the
icon will appear on the display.
TEMP
Note: The remote must be within 25 feet and line of
sight with the AC unit in order to transmit signals.
SELF-CLEAN Feature
This feature helps carry away accumulated dust, dirt,
bacteria, and other microbial contents away from the
indoor evaporator, and can be activated in Cool Mode.
To activate this feature, press and hold the
button for 5 seconds. The
icon will then appear on
the remote's display. Once the procedure is
completed, the system will return to the previous
mode, and the
icon will remain for 10 minutes.
The
button can be pressed to cancel this feature
during the process. Two beeps will be emitted from
the machine when it is finished, or cancelled.
This procedure can result in some uncommon noise
coming from the machine. This noise is normal as a
TEMP
side effect of the plastics expanding and contracting
due to reactions with heat and cold.
5s
It is recommended to use this function only when
indoor temperature is under 86°F and outside
temperature is between 41°F and 86°F.
It is suggested to run this feature once every 3 months.
Page 19
Advertisement
