Advertisement
Operating Instructions
Using the Timer - TIMER ON
The TIMER feature allows you to set a time delay for
the system to turn itself on or off.
To set a time delay for the system to turn itself ON in
X amount of hours:
1. Begin by pressing the
system is powered off. The
display flashing. The default setting is 12 o'clock.
2. Use the TEMP – and + buttons to set the needed
time delay in 1, 10, or 60 minute increments.
3. Press the
button a second time to confirm.
4. Press the
button to select the desired
operating mode that the unit should start up in.
5. Set the desired fan speed that the unit should
start up in by pressing the
6. Use the TEMP – and + buttons to set the desired
operation temperature. The unit is now primed.
Using the Timer - TIMER OFF
The TIMER OFF feature allows the appliance to
turn itself off after X amount of hours have passed.
The symbol
will appear. To set a time delay
for the system to turn itself off in X amount of hours:
1. Confirm that the appliance is on and running.
2. Press the
button to enter the prompt for
switching off the system. Use the TEMP – and +
buttons to configure the time delay setting.
3. Press the
button again to confirm. It can
also be pressed once more to cancel the setting.
button while the
symbol will
then
button.
TEMP
NOTE Regarding Timers
• Press the
buttons to cancel
at any time in Timer Modes.
• The programming will cancel
if no buttons are pressed after
10 seconds. This may require
restarting the process.
4
Page 17
Advertisement
