Advertisement
Operating Instructions
Regarding the Airflow of the Indoor Unit
The air that is pulled in by the fan (the "return air") enters the
grille and is passed through the filter. It is then
cooled/dehumidified/heated through the heat exchanger.
The direction of the air output is manipulated up and down by the
motorized louver, and left to right via manually controlled vertical
deflectors. Some models may come with "dual-swing" capability,
which offers both a horizontal and vertical motorized air flow swing.
Controlling the System's Airflow
1. Pressing the SWING buttons activates the louver.
• Press the Swing
flaps to swing up and down. Press this button again
to stop swing movement at the current angle.
• Press the Swing
flaps to swing left and right. Press this button again
to stop swing movement at the current angle.
2. If the vertical deflectors (which are located
underneath the flaps) are adjusted manually,
they can be used to fix the airflow in a certain
vertical position before turning the system on.
Note: The SWING buttons can also be used to set a fixed angle of airflow
by pressing the button once the louver moves to the desired angle.
CAUTION
• Do not manipulate the louvers themselves
manually, or serious damage may occur.
• Deflector adjustments should be made
only when the system is switched off.
• Never poke fingers, sticks, or other
objects into the air inlet/outlet vents.
Page 12
button to trigger the horizontal
button to trigger the vertical
Filter
Heat
Flap
Vertical
Movement
Deflectors
4
Fan
TEMP
Horizontal
Flaps
Advertisement
