Advertisement
Operating Instructions
46°F Freeze Protection Function
This feature is meant to be used to prevent
freezing while the user is away from home.
When turned on, it sets the system to keep a tem-
perature of 46°F. If the unit is in standby, then the
setting
will automatically start the heating mode when the
room temperature is equal to or lower than 46°F.
It will set the system back to standby when the room
temperature reaches 48°F.
Press and hold the
in heat mode for 3 seconds in order to activate this
feature. The
symbol will then appear to show
that the 8°C/46°F heating feature is activated.
Press any button other than TIMER ON/OFF, I
FEEL, or SWING to de-activate.
MUTE Mode
When the system is muted, the remote controller will
display LOW fan speed, and the indoor unit will
operate at its lowest fan speed in order to
minimize operation noise.
Press the
button in order to activate this mode.
The
icon will display to indicate that the system is
muted.
This mode can be cancelled by pressing either the
FAN, TURBO, or SLEEP buttons.
Note: The MUTE feature cannot be activated when the
system is in DRY mode.
Page 18
and
buttons together
TEMP
4
3s
TEMP
TEMP
Advertisement
