Machine Overview - HAKO Minuteman Rush 100 Parts And Instruction Manual

MACHINE OVERVIEW

1. Handle- Used to maneuver and position the
R100H.
Contains switch box (for switchbox, see #12).
2. Recovery tank and lid- Tank collects recovered
waste water. Lid allows access to recovery tank
and creates a seal to ensure suction.
3. Solution tank and lid- Tank used to store clean
water or solution for your job. Lid allows access
to the solution tank and prevents external
contamination of solution tank.
4. Non-marking front 4" locking casters and
rear 10" wheels.
5. Recovery/vacuum hose inlet barb- connect
your recovery vacuum hose to this barb.
Page 10
6. Solution line Q.D.- Pressurized connection
for solution line.
7. Male twist lock pigtail- Connects to 50ft
power cord.
8. Female twist lock port for heater.
9. Cool air intake for vacuum.
10. Recovery tank dump valve- Pull up to open.
11. Heater mounting brackets.
12. Switch box- one switch marked "VACUUM"
and one switch marked "PUMP". Switches
light up when powered on.
13. 1000Watt Heater.
R100H Rush Carpet Extractor 988756 Rev C 06/23