Table of Contents
Advertisement
Quick Links
Primor 2600
Installer manual
Installation and commissioning instructions
Note:
On the cover sheet you can find warning information, and an explanation of the symbols and
terms used, together with the exclusion of liability.
Mount the keypad before installing the electronic lock. All the keypads of the Primor series
which support axis drive (RO, RE) can be used. All input units from the series basically
have this function, however an additional handle or something similar is required to operate
the lock's bolt drive. For information on how to install the keypads, please refer to "APxxxx
Part 2a- Keypad installer manual".
Contents
General ................................................................................................................................. 2
Preparation for installation ..................................................................................................... 3
Installation dimensions - lock P2600 .................................................................................. 3
Preparation of the boltwork / door ...................................................................................... 3
Installation ............................................................................................................................. 4
Wiring / installation ................................................................................................................ 4
Connection of an analogue keypad ................................................................................... 5
Function test .......................................................................................................................... 5
Input of the opening code .................................................................................................. 6
Keypad test ....................................................................................................................... 6
en_02 P2600-Part 2b-Installer manual V1.01
1 / 6
Advertisement
Table of Contents
Related Manuals for Wittkopp Primor 2600
Summary of Contents for Wittkopp Primor 2600
-
Page 1: Table Of Contents
Primor 2600 Installer manual Installation and commissioning instructions Note: On the cover sheet you can find warning information, and an explanation of the symbols and terms used, together with the exclusion of liability. Mount the keypad before installing the electronic lock. All the keypads of the Primor series which support axis drive (RO, RE) can be used. -
Page 2: General
Primor 2600 Installer manual Installation and commissioning instructions General P2600 series locks have standard office environment. We recommend a installation dimensions and can be installed security and function test of the electronic in all 4 installation positions (right, left, top, lock after around 10,000 closings. -
Page 3: Preparation For Installation
Primor 2600 Installer manual Installation and commissioning instructions Preparation for installation Installation dimensions - lock P2600 Preparation of the boltwork / door To install the lock, there must be three screws (min. strength class 8.8). The screw threaded holes for fastening on the length should be measured so that a boltwork or inside the safe door. -
Page 4: Installation
Primor 2600 Installer manual Installation and commissioning instructions Installation The retaining screws must be tightened in There must be no tension or pressure on such a way that a permanent and firm hold the lock bolt after installation. is ensured. -
Page 5: Connection Of An Analogue Keypad
Primor 2600 Installer manual Installation and commissioning instructions Connection of an analogue keypad Instructions for inserting the battery can be found in the operating instructions for the corresponding Primor keyboard. e.g. Primor RO analogue keypad Function test Carry out a function test after completing all The relationship between easy opening and the mounting and installation work. -
Page 6: Input Of The Opening Code
Primor 2600 Installer manual Installation and commissioning instructions Input of the opening code The opening code can be entered e.g. master factory code ✓ → directly as described above, without selection. The bolt is released for approx.
Need help?
Do you have a question about the Primor 2600 and is the answer not in the manual?
Questions and answers