Nortel Meridian 1 Succession 1000 Manual page 38

Page 38 of 236 Off-premises stations
Table 7
XOPS software and hardware settings cross-reference for NT1R20 XOPS
CLS
Loop
resistance
553-3001-182 Standard 1.00
Following are the card losses downloaded:
Transmission Plan
North American
China IPE
For information regarding the download parameters (Rx, Tx and dBr), refer
to the section of this document titled "Static Loss Plan Downloading" on
page 61. For information regarding Alternative Loss Plan administration,
refer to the section of this document titled "Dynamic Pad Switching" on
page 49.
NT1R20 hardware strapping options:
For CLS set to ONS in LD 10:
• JX.0 and JX.1 — OFF
For CLS set to OPS in LD 10:
• JX.0 and JX.1 — OFF if loop loss is in the range 0-2.5 dB
• JX.0 and JX.1 — ON if loop loss is in the range >2.5-15 dB
Table 7 is a cross-reference of software and hardware settings required for
various installations:
On-premises station
ONS
0-460 ¾
October 2003
Downloaded values
Rx dBr
9 3.5
16 0.0
Off-premises station
OPS
0-2300 ¾
Tx dBr
17 - 0.5
23 - 3.5