Hardware Requirements; Dynamic Pad Switching; Alternate Loss Plan For China - Nortel Meridian 1 Succession 1000 Manual

Page 56 of 236

Dynamic Pad Switching

Hardware requirements

Dynamic Pad Switching

Alternate Loss Plan for China

553-3001-182 Standard 1.00
The following sections outline the hardware requirements.
All North American-based Intelligent Peripheral Equipment (IPE) trunks use
Dynamic Pad Switching algorithms to determine which pads to select.
• North American-based refers to XTRK = XUT or XEM in LD 14, except
for China
• International Generic XFCOT (NT5K16)
The Alternate Loss Plan for China (APAD prompt response number 5; see
Administration above) requires the following IPE cards:
• NTRA02XUTC
• NTRA03XEMC
• NTRA04XFALCC with Message Waiting
• NTRA05XALCC without Message Waiting
• NTRA06XOPSC Off-premises Station
October 2003