Table of Contents
Advertisement
Enviro-ZONE
Control Panel Definitions:
Power – On/Off button. When switched on, the control will turn on the interior light and the
display. The fan is left off until there is a call for heat or a timer is started.
When the "Power" button is pushed to turn the oven off, the interior lights turn off, the front
display turn off.
Up – Allows you to scroll up.
Down – Allows you to scroll down.
Cancel – When scrolling through
menus this will allow you to back
up to the previous menu. In
program mode this will allow you
to back up to the previous step.
Function
Keys
–
active when a program option is
displayed on the display adjacent
to that key.
Back UP Controls – Allows oven
operation utilizing a completely
separate set of manual controls.
Operation in Back - Up Mode is
described in the "Operation with
Back Up Controls" section of this
manual.
OPERATION WITH BACK UP CONTROLS
During Back-Up operation, the main control
panel is disabled by removing it's power allowing
operator to utilize a completely separate set of
controls.
On both the Enviro-Zone & Enviro-Star models, the
back-up controls are located behind the Access
Door located just below the Control Panel. Inside
you will find a Temperature Control Knob, a Back-
Up Control toggle switch and a spring loaded Back-
Up Steam toggle switch.
To enable Back-Up operation, throw the Back-
Up Control toggle switch to the ON position.
The oven's convection fan will come on at High
speed / CCW and the heat can be controlled us-
ing the Temperature Knob. Steam may be applied
manually using the Back-Up Steam toggle switch.
Unlike normal operation, the Back-Up mode does
not employ energy saving processes or allow the
fan to reverse direction or change speeds.
Keys
are
BACKUP CONTROL
ACCESS DOOR
15
POWER
FUNCTION
KEYS
DOWN
UP
CANCEL
Temperature Knob
OCE/OCG BACK-UP CONTROLS
1-SHOT
STEAM
FAN
HI/LOW
Steam Toggle Switch
IL1218
Control Toggle Switch
Advertisement
Table of Contents
