Nortel Meridian 1 Succession 1000 Description page 126

Page 126 of 184
Table 21
External Lamp Indication tab settings (Part 2 of 2)
Attribute
Message Waiting
The available cadences are:
• On – The external lamp is on solid.
• Flash – The external lamp cycles at the following rate: 0.5 seconds on; 0.5 seconds off.
• Flicker – The external lamp cycles at the following rate: 1.625 seconds on; 0.375 seconds off.
• Blink – The external lamp cycles at the following rate: 0.5 seconds on; 1.5 seconds off.
Note: If more than one External Lamp Indication option is enabled and active, the external
lamp shows the cadence of the option with highest priority. The priority of the External Lamp
Indication options from highest to lowest is: Manual Override, Headset Disconnect, Active Call,
and Message Waiting. For example, if there is a message waiting and an active call, the
cadence for Active Call is used for the external lamp.
553-3001-368 Standard 1.00
i2050 Software Phone
Description
Select one of the cadences to indicate when the i2050 Software Phone
message waiting light is on. Select None to disable this feature.
Note 1: The i2050 Software Phone message waiting light normally
indicates that there is a message waiting. However, most systems also
turn on or flash the message waiting light when the i2050 Software
Phone is ringing.
Note 2: The available cadences are listed at the end of the table.
October 2003