Page 304 of 376
553-3021-210
Standard 1.00
Installing earthquake bracing
Figure 108
Mounting plate installation
Pedestal
Anchor holes
Adapter bushing
Procedure 66
Installing Kit B
1
Locate the two mounting plates for each column over the anchor holes.
Insert the anchors into the holes and tap the anchors into place with a
mallet.
2
Level the plates with shims. Leave the stack of shims exposed until all
leveling has been completed (this will allow the addition or removal of
shims if necessary).
October 2003
Mounting plate
Anchor bolt
Shim
553-6071