Data Output Formats - SMC Networks SMC-1310 User Manual

The attached device can also take its operating power from the terminal if required.
The operating power matches the input voltage. If the Panel Display operating power is 12VDC, the
voltage output supplied at the device connectors will be 12VDC.

1.6.1 DATA OUTPUT FORMATS

The SMC-1310 supports data output over serial and ethernet TCP or UDP, Modbus, SNMP and TCP.
The Serial and Ethernet string output can be formatted using predefined NMEA style data sentences
as below examples. Or by the user defining its own output strings
MWV Wind speed and angle
HDM Heading magnetic
HDT Heading true
XDR Transducer measurement
XDR Weather station message
GLL Geographic position, latitude / longitude
Note, each of the above has a two letter identifier than can be user defined, for example
WIXDR.
SMC-1310 User Guide revision 1.1 SMC Ship Motion Control www.shipmotion.eu
10