Roll Media Cutter Is Jammed (Cutter Jam 03/04 ) - Brother HL-JF1 Quick Reference Manual

Roll media Cutter is Jammed (Cutter Jam
03/04 )
If the LCD displays the following messages, follow these
steps:
• [Cutter Jam 03], [Cutter Jam 04]
a
Unplug the machine from the AC power outlet.
b
Open the lower Jam Clear Cover B (1) at the back
of the machine.
c
Manually slide the cutter unit (1) to the far right
(home position).
d
Close the lower Jam Clear Cover B. Make sure the
cover is closed completely.
23
e
1
f
1
If your LCD displays [Cutter Jam 03], do the
following to reload the Fabric Roll.
a. Pull Tray #2 completely out of the machine as shown
by the arrow.
b. Remove the Fabric Roll from Tray #2 and roll up the
fabric.
If the feeding edge is folded, bent, or cut at an angle, cut it
straight across.
c. Reload the Fabric Roll into Tray #2.
For details on loading, refer to "Load the Fabric Roll in
Tray #2" (P.8).
d. Slowly push Tray #2 completely into the machine.
Reconnect the power cord.