Brother HL-JF1 Quick Reference Manual page 23

n
Gently close the top cover using the finger holds on
each side.
o
Pull Tray #2 completely out of the machine as
shown by the arrow.
p
Remove the Fabric Roll from Tray #2 and roll up
the fabric.
If the feeding edge is folded, bent, or cut at an angle, cut it
straight across.
q
Reload the Fabric Roll into Tray #2.
For details on loading, refer to "Load the Fabric Roll in
Tray #2" (P.8).
r
Close the upper Jam Clear Cover A at the back of
the machine. Make sure the cover is closed
completely.
s
Put the paper support firmly back in the machine.
Make sure you fit the paper support into the
channels.
t
Slowly push the paper trays completely into the
machine.
u
Reconnect the power cord.
22