Fabric Roll Is Jammed In The Back Of The Machine; Fabric Roll Is Jammed Inside And In The Back Of The Machine - Brother HL-JF1 Quick Reference Manual

Fabric Roll is Jammed in the Back of the
Machine
If the LCD displays the following messages, follow these
steps:
• [Roll Fabric Jam 01], [Roll Fabric Jam 02]
a
Unplug the machine from the AC power outlet.
If your LCD displays [Roll Fabric Jam 02], open the
upper Jam Clear Cover A (1) at the back of the machine.
1
When finished, continue with the next step.
b
Pull Tray #2 completely out of the machine as
shown by the arrow.
c
Remove Fabric Roll from Tray #2 and roll up the
fabric.
If the feeding edge is folded, bent, or cut at an angle, cut it
straight across.
d
Reload the Fabric Roll into Tray #2.
For details on loading, refer to "Load the Fabric Roll in
Tray #2" (P.8).
17
If your LCD displays [Roll Fabric Jam 02], close the
upper Jam Clear Cover A at the back of the machine. Make
sure the cover is closed completely.
When finished, continue with the next step.
e
Slowly push Tray #2 completely into the machine.
f
Reconnect the power cord.
Fabric Roll is Jammed Inside and in the
Back of the Machine
If the LCD displays the following messages, follow these
steps:
• [Roll Fabric Jam 03]
a
Unplug the machine from the AC power outlet.
b
If the paper is loaded in the manual feed slot,
remove the paper.
c
Pull Tray #1 (1) completely out of the machine as
shown by the arrow.
d
Lift the paper support (1) and then pull it at an
angle completely out of the machine as shown by
the arrow.
1
1