SMART Board 6000 Pro Series Manual page 51

CHAPTER 3
USING APPS ON THE DISPLAY
NOTES
Connecting a computer to the iQ appliance requires a recent version of the iQ appliance.
l
See the Identifying your iQ appliance model
To connect a computer to the display's connector panel, see Using SMART software on
l
connected computers on page 14.
If you want to share content from a copyright-protected source (such as a Blu-ray™ player),
l
connect the device to the display's connector panel. See Using SMART software on
connected computers on page 14.
Showing content on the display
To show content on the display
1. Make sure the input source is OPS/HDMI (see Using SMART software on connected
computers on page 14).
2. If an iQ appliance (AM30) is installed, connect a computer to the iQ appliance's HDMI in and
USB receptacles.
If an iQ appliance (AM40) is installed, connect a device to the display's HDMI 1, HDMI 2,
DisplayPort or VGA connectors.
NOTE
To enable touch control of the device, connect a USB cable to the corresponding USB port
for that video input port.
3. Optionally, orient the display. See the SMART Board 6000 and 6000 Pro series interactive
displays installation and maintenance guide (smarttech.com/kb/171167).
4. Open the launcher.
The launcher appears.
5. Tap Input .
The display looks for a connection, and the computer's desktop appears on the display's
screen.
Downloading SMART software
SMART Learning Suite includes SMART Ink. When you download and install SMART Learning Suite
on the connected computer, SMART Ink enables you to write and draw in digital ink over
applications, files, folders websites and any other open window on your computer.
43 smarttech.com/kb/171166
wizard.