SMART Board 6000 Pro Series Manual page 23

CHAPTER 2
GETTING STARTED WITH THE DISPLAY
You can connect computers with SMART Learning Suite to the display (as shown below) and then
view the computers' input on the display.
NOTES
To interact with content, connect a USB cable to the appropriate USB Type-B receptacle on
l
the connector panel (as shown in the above diagram).
Your organization's installers might have connected cables to the display and run the cables
l
behind a wall or under the floor to a desk or table where you can place your computer.
If you have an older model iQ appliance (AM30), you can connect a computer to the
l
appliance and use the Input app to view the computer's input. For more information on the
Input app, see Using Input on page 42.
To view a connected computer's input
Press the Input Select button
is selected.
15 smarttech.com/kb/171166
on the front control panel until HDMI1, HDMI2 or DisplayPort