GE LOGIQ 7 Pro Quick Manual page 43

LOGIQ 7/LOGIQ 7 Pro Quick Guide
Related Hazards (continued)
Do not use this equipment if a safety problem is known to exist. Have the unit repaired and performance verified by qualified service
CAUTION
personnel before returning to use.
Smoke & The system must be supplied from an adequately rated electrical circuit. The capacity of the supply circuit must be as specified in
Chapter 3 of the Basic User Manual.
Fire Hazard
Biological For patient and personnel safety, be aware of biological hazards while performing invasive procedures. To avoid the risk of disease
Hazard transmission:
• Use protective barriers (gloves and probe sheaths) whenever possible. Follow sterile procedures when appropriate.
• Thoroughly clean probes and reusable accessories after each patient examination and disinfect or sterilize as needed. Refer to
Probes and Biopsy in the Basic User Manual for probe use and care instructions.
• Follow all infection control policies established by your office, department or institution as they apply to personnel and equipment.
Contact with natural rubber latex may cause a severe anaphylactic reaction in persons sensitive to the natural latex protein. Sensitive
CAUTION
users and patients must avoid contact with these items. Refer to package labeling to determine latex content and FDA's March 29, 1991
Medical Alert on latex products.
The system is equipped with an Auto Freeze feature which disables acoustic output and freezes the image when the system is not in use.
CAUTION
Take care when deactivating this feature.
When you move the Control Panel up/down with the monitor, place BOTH hands on the Control Panel. Touching other moving parts other
CAUTION
than the Control Panel may cause personal injury.
Never put any device onto the monitor.
CAUTION
Safety
Direction 5307393-100 Rev. 1 39