KTM 450 EXC-F 2018 Setup Instructions page 36

3 WORK
3.19
3.20
34
V00457-10
Installing the engine guard (EXC‑F AU, All EXC‑F Six Days)
H01638-10
Opening the filler cap
Danger
Fire hazard Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
–
Do not refuel the vehicle in the vicinity of open flames or lit cigarettes.
–
Switch off the engine for refueling.
–
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
–
If any fuel is spilled, wipe it off immediately.
–
Observe the specifications for refueling.
(All US models)
–
Check throttle cable routing.
Both throttle cables must be routed, side by side,
on the back of the handlebars and above the fuel
tank bracket, to the throttle valve body. Both throttle
cables must be secured behind the fuel tank contact
area rubber band.
» If the throttle cable routing is not as specified:
–
Correct throttle cable routing.
Finishing work
–
Install the fuel tank. ( p. 31)
–
Mount the seat. ( p. 26)
–
Attach the engine guard on the frame at the rear and swing up
at the front.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
1 .
M6 10 Nm (7.4 lbf ft)