KTM 450 EXC-F 2018 Setup Instructions page 25

3.8 Installing the fork legs
Main work
(EXC‑F EU/AU/US)
–
Position the fork legs.
Bleeder screws
Info
The rebound damping is located in right fork
leg REB (red adjusting screw). The compression
damping is located in left fork leg COMP (white
402556-10
adjusting screw).
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the
top) must be flush with the top edge of the upper
triple clamp.
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Tighten screws
Guideline
Screw, bottom triple
clamp
V00452-11
(All EXC‑F Six Days)
–
Position the fork legs.
Bleeder screws
Info
The rebound damping is located in right fork
leg REB (red adjusting screw). The compression
damping is located in left fork leg COM (white
adjusting screw).
402556-10
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the
top) must be flush with the top edge of the upper
triple clamp.
–
Tighten screws
Guideline
Screw, top triple
clamp
–
Tighten screws
Guideline
Screw, bottom triple
clamp
V00453-11
1
are positioned toward the front.
2
.
M8 20 Nm
(14.8 lbf ft)
3 .
M8 15 Nm
(11.1 lbf ft)
1
are positioned toward the front.
2
.
M8 17 Nm
(12.5 lbf ft)
3
.
M8 15 Nm
(11.1 lbf ft)
3 WORK
23