KTM 450 EXC-F 2018 Setup Instructions page 20

2 SETUP
18
–
Position the frame protectors on both sides.
–
Mount and tighten screws
Guideline
Screw, frame protector
–
Mount and tighten screws
Guideline
Screw, frame protector
–
F01078-10
Mount the cable tie(s).
(EXC‑F AU, All EXC‑F Six Days)
–
Install the engine guard. (
–
Unpack and mount the KTM PowerParts included in the deliv-
ery (optional).
Info
Read the accompanying KTM PowerParts fitting instruc-
tions.
–
Apply the sticker included in the delivery (optional).
–
Set kilometers or miles. (
–
Adjust the combination instrument. (
–
Set the clock. (
–
Refuel. ( p. 35)
–
Position all controls in their exact positions on the handlebar.
Tighten all screws.
–
Prepare the vehicle according to the specifications in the
KTM Dealer.net for handover to the customer.
Info
Transport mode must be deactivated to be able to start
the motorcycle.
cn .
M5 3 Nm (2.2 lbf ft)
co with the washers.
M5 3 Nm (2.2 lbf ft)
p. 34)
p. 36)
p. 37)
p. 38)