KTM 450 EXC-F 2018 Setup Instructions page 34

3 WORK
32
–
Attach the fuel tank breather hose.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
K00556-10
–
Position the horn with the horn bracket.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
K00558-11
(EXC‑F EU/AU, EXC‑F Six Days EU)
–
Plug in connector
–
Remove the wash cap set.
–
Thoroughly clean the plug-in connection of the fuel line
using compressed air.
Info
Under no circumstances should dirt enter into the
fuel line. Dirt in the fuel line clogs the injection
H01699-10
valve!
–
Lubricate the O-ring and connect plug-in connection
for the fuel line.
Info
Route the cable and fuel line at a safe distance
from the exhaust system.
(All US models)
–
Plug in connector
–
Remove the wash cap set.
–
Thoroughly clean the plug-in connection of the fuel line
using compressed air.
Info
Under no circumstances should dirt enter into the
fuel line. Dirt in the fuel line clogs the injection
E00517-10
valve!
–
Lubricate the O-ring and connect plug-in connection
for the fuel line.
1 with the rubber bushing.
M6 10 Nm (7.4 lbf ft)
2 with the collar bushings.
M6 10 Nm (7.4 lbf ft)
3
for the fuel pump.
3
for the fuel pump.
4
4