Conversion To Lpg - CDA CD 9002/1 SS Operating Instructions Manual

Injectors replacement of top burners
Every cooker is provided with a set of injectors for the various types of gas.
Injectors not supplied can be obtained from the After-Sales Service.
Select the injectors to be replaced according to the table at page 39.
The nozzle diameters, expressed in hundredths of a millimetre, are marked on the body
of each injector.
To replace the injectors proceed as follows:
Remove the grids and extract the burner bodies.
–
Using a wrench, substitute the nozzle injectors "J" (Fig. 38) with those most suitable for
–
the kind of gas for which it is to be used (see "Table for the choice of the injectors").
The burners are conceived in such a way so as not to require the regulation of the
primary air.

Conversion to LPG

Fig. 38
J
37