Page 1
N8151-51A 内蔵 DAT 取り扱いの注意事項 この度は弊社の製品をお買い上げ頂き、誠にありがとうございます。 ① サイドカバー及びフロントマスクを取り外して工場出荷時 5’デバイスベイ上段に 搭載しているドライブを取り外し、下段の空き 5’デバイスベイに取り付ける。 (ドライブの取り付け/取り外しは本体装置の説明書を参照してください。) ■ 本体装置取り付け時の注意事項 本内蔵 DAT を取り付ける場合、実装位置に制限がある本体装置があります。以下の、説 ② 本内蔵 DAT を 5’デバイスベイ上段に取り付ける。 明にしたがい取り付けを行ってください。 1.対象本体装置 ③ ドライブ及び内蔵 DAT の取り付けが終わりましたら、 DAT ドライブ 内部ケーブルがきちんと接続されていることを確認し 本体装置名 てフロントマスク、サイドカバーを取り付けてください。 Express5800/54Xa,54Xb Express5800/110Ga,110Eg Express5800/620Xi-s,620ai-s 2.取り付け方法 工場出荷時に搭載しているドライブ装置の搭載位置を変更する必要があります。 ■ SCSI BIOS で転送速度の表示について...
Page 2
N8151-51A Built-In DAT Drive Usage note ① Remove the side cover and front panel from your system chassis. Thank you for purchasing NEC peripheral products. ② Remove the factory-installed optical drive from your system and reinstall the drive to the lower bay of the 5-inch device bay (refer to the manual that ■...
Need help?
Do you have a question about the N8151-51A and is the answer not in the manual?
Questions and answers