Table of Contents
Advertisement
°C
8 8
DELUXE CONTROLLER FUNCTIONS
10L
X
If one or more Deluxe controllers are installed, at least one must be on or the Bath Fill function activated for
the water heater to operate. If all Deluxe controllers and the Bath Fill function are off, the water heater will only
deliver cold water.
on / off ( ) button – The on / off ( ) button must be pressed once to turn on the Deluxe controller. A Deluxe
on / off operating light – The on / off operating light on the on / off ( ) button will glow when the Deluxe
PRIORITY light –
operating light –
temperature display panel – The current temperature setting is displayed in °C on all Deluxe controllers
up () button –
down () button –
°C
8 8
assistance call ( ) button – Pressing this button sounds an alert message on all Deluxe controllers, indicating
X
10L
speaker –
) button – The bath fill (
bath fill (
bath fill operating light – The bath fill operating light on the bath fill (
TEMPERATURE CONTROL – DELUXE
°C
X
10L
controller cannot be turned on if water is flowing from a hot tap.
To turn off a Deluxe controller, press the on / off ( ) button once. A Deluxe controller
can be turned off whilst water is flowing.
controller is turned on.
The light will go out when the Deluxe controller is turned off.
The PRIORITY light will glow on a Deluxe controller when the controller has priority.
The Bathroom Deluxe controller(s), if they are turned on, have priority over the Kitchen
Deluxe controller.
PRIORITY means that particular Deluxe controller has control of the water heater
temperature setting. The water temperature setting can only be adjusted by a Deluxe
controller that has priority and is displaying the PRIORITY light.
The operating light will glow on all Deluxe controllers, whether they are on or off, when
hot water is flowing, regardless of which Deluxe controller has priority.
(whether hot water is flowing or not), when any Deluxe controller is on. If all Deluxe
controllers are off, the display remains blank.
The up () button increases the water temperature setting (refer to
Adjustment – Deluxe Controllers"
The down () button decreases the water temperature setting (refer to
Adjustment – Deluxe Controllers"
°C
0
BATH (l)
°C
8 8
that assistance is required in the room from which the assistance call ( ) button was
activated.
X
10L
The audio of the voice prompts and chimes is emitted from the speaker.
) button must be pressed once to turn on the Bath Fill function.
When the Bath Fill function is turned on, the last selected bath fill water volume in litres
will be displayed in the bath fill water volume display panel and the last selected bath fill
temperature in °C will be displayed in the temperature display panel.
The bath fill water volume and temperature can be adjusted by using the BATH FILL
°C
8 8
VOLUME and BATH FILL TEMPERATURE buttons located behind the hinged panel on
the lower half of the Deluxe controller (refer to
10L
X
To turn off the Bath Fill function, press the bath fill (
(
) button is pressed and the Bath Fill function is turned on.
The light will flash when the Bath Fill function is complete but before the Bath Fill function
has been turned off.
The light will go out when the bath fill (
is turned off.
°C
8 8
10L
X
°C
8 8
10L
X
on page 27).
on page 27).
8 8
°C
8 8
X
"Bath-Fill Function"
10L
X
°C
8 8
) button will glow when the bath fill
10L
X
) button is pressed and the Bath Fill function
22
"Temperature
"Temperature
BATH (l)
°C
10L
on page 32).
) button.
0
°C
Advertisement
Table of Contents
