Rheem 864 Series Owner's Manual And Installation Instructions page 37

8 8
Turning Off Bath Fill Function During Its Operation
The bath fill operation can be interrupted by pressing the bath fill (
operation.
10L
X
If it is necessary to turn off the Bath Fill function before the operation is complete, during

Press the bath fill (
At this first press of the bath fill (

Water flow from the hot tap will cease.

The operating light will go out.

The bath fill water volume display panel will show
0 litres..

The temperature display will go blank.

The bath fill operating light will flash.

The voice prompt will sound;
"bath filling has been stopped, please turn off the hot
water tap and press the bath fill (
8 8
10L
X

Close the hot tap.

Press the bath fill (
At this second press of the bath fill (

The bath fill operating light and bath fill indicator light
will go out.

The bath fill water volume display will go blank.

Note: If the hot tap has not been turned off, the voice
prompt will sound;
"please ensure the bath hot water tap is turned off"
°C
°C
8 8
10L
X
) button.
) button:
°C
8 8
10L
X
) button to finish"
°C
°C
8 8
10L
X
) button again.
) button:
8 8
10L
X
TEMPERATURE CONTROL – DELUXE
) button before completion of the bath fill
37
Step 7:
°C
0
BATH (l)
"bath filling has been stopped,
please turn off the hot water tap
and press the
) button to finish"
bath fill (
°C
0
BATH (l)
°C
BATH (l)
"please ensure the bath hot
water tap is turned off"