Rheem 864 Series Owner's Manual And Installation Instructions page 34

TEMPERATURE CONTROL – DELUXE
Bath Fill Function – Explanatory Notes
To operate the Bath Fill function:
Turn off all Deluxe controllers
1.
It is advised to turn off all Deluxe controller(s) before

activating the Bath Fill function.
Refer to the notes on the
controllers on page 30.
The Deluxe controllers do not need to be on to set the
bath fill temperature and bath fill water volume and to
turn on the Bath Fill function.
Pull down the front panel on the Deluxe controller.
2.
The BATH FILL
TEMPERATURE up () and down () buttons will be
exposed.
3. Set the bath fill temperature
Press the BATH FILL TEMPERATURE up () button

or the BATH FILL TEMPERATURE down () button.
The first press
TEMPERATURE up () button or the BATH FILL
TEMPERATURE down () button will bring up the
last selected bath fill temperature setting.
While the bath fill temperature is displayed, each
subsequent
TEMPERATURE up () button or BATH FILL
TEMPERATURE down () button will change the
temperature setting.
"Temperature
Refer to
Controllers"
on page 27.
When the BATH FILL TEMPERATURE up () button
is pressed and the temperature setting is increased,
the voice prompt will sound;
"hot water temperature has been increased"
When the BATH FILL TEMPERATURE down () button is pressed and the temperature setting is
decreased, the voice prompt will sound;
"hot water temperature has been decreased"
The selected temperature setting will be displayed in the temperature display panel and will be
displayed on all Deluxe controllers.
The temperature display panel will go blank 3 seconds after the last press of either of the bath fill
temperature adjustment buttons.
The bath fill temperature setting will be remembered when the bath fill (
Bathroom Deluxe
VOLUME and BATH
of either the BATH
press of the BATH
Adjustment
BATH (l)
BATH FILL
VOLUME
B1
FILL
Bath Fill
1. 2.
Bath Bath
Water Fill
Volume Temp
Set Bath Fill
Water Volume
and Temperature
Hot Water
1.
Press
FILL
BATH (l)
FILL
BATH FILL
VOLUME
B1
–
Deluxe
Bath Fill
1. 2.
Bath Bath
Water Fill
Volume Temp
Set Bath Fill
Water Volume
and Temperature
Hot Water
1.
Press
8 8
34
°C
BATH FILL
TEMPERATURE
3. 4. 5. 6. 7.
Open Bath Fill Close
hot tap completed hot tap
(automatic)
Press Bath Press Bath
Fill Button Fill Button Fill Button
(Red light on) (Red light flashes) (Red light off)
2. 3. 4.
PRIORITY Adjust Open
Light on Temperature hot tap
°C
4 0
"hot water
temperature
BATH FILL
has been
TEMPERATURE
increased"
or
"hot water
temperature
4. 5.
3. 6. 7.
has been
Open Close
Bath Fill
hot tap hot tap
completed
decreased"
(automatic)
Press Bath Press Bath
Fill Button Fill Button Fill Button
(Red light on) (Red light flashes) (Red light off)
2. 3. 4.
PRIORITY Adjust Open
Light on Temperature hot tap
°C
10L
X
) button is pressed "on".