Table of Contents
Advertisement
To switch the function set in the recording screen
1
Set so the function to be used can be selected.
≥ If the desired function cannot be selected, use the settings below.
Functions
Gain adjustment
Shutter speed
White balance
VAR adjustment
Area Mode
Focus Assist
Headphone Volume Adjustment Connect headphones to this unit.
Audio level adjustment
2
Rotate the jog dial in the recording screen to switch to the desired jog dial
icon (yellow display: Function Selection Mode).
3
Push the jog dial.
≥ The jog dial icon for the selected function turns white. (Function Execution Mode)
≥ The operation icon can be selected when [
≥ The selected function can be adjusted by rotating the jog dial.
∫ Headphone Volume Adjustment
Adjust the volume of the headphone while recording.
≥ Set [VOLUME] to [ON].
1
Connect headphones to the headphone terminal.
2
Rotate the jog dial to adjust the volume.
≥ You can also adjust the volume by touching
performing touch operations after the adjustment allows you to
exit the setting.
≥ Actual volume to be recorded does not change.
3
Push the jog dial to finish the adjustment.
Touch the manual icon
Mode.
(l
Touch the manual icon
Mode.
(l
Touch the manual icon
assigned as <WHITE BAL> to switch to Manual White
Balance Mode.
Rotate the jog dial in Manual White Balance Mode to set the
White Balance mode to [VAR].
Press the USER button assigned as <AREA> to set [AREA
MODE] to ON.
Set [FOCUS ASSIST 1]/[FOCUS ASSIST 2] to [EXPAND] or
[BOTH]*, and press the USER button assigned as <FOCUS
ASSIST 1>/<FOCUS ASSIST 2> to set Focus Assist to ON.
(l
49)
* This item is only set in [FOCUS ASSIST 1].
(l
130)
- 87 -
Settings to be changed in advance
to switch to Manual Gain
GAIN
AUTO
54)
to switch to Manual Shutter
SHUTTER
AUTO
59)
or press the USER button
WB
AUTO
(l
56)
(l
73)
s
ICONS] is selected.
/
. Not
(l
56)
(l
82)
A [VOLUME]
Advertisement
Table of Contents
