Setting The Recording Counter - Panasonic HC-MDH3 Owner's Manual

≥ This unit will adjust the time code in accordance with the frame rate of the [REC FORMAT]
(l 118). Therefore, it may not be continuous from the previous final time code when the
recording format is changed.
≥ If the frame rate in [REC FORMAT] is set to 23.98p, set the number of frames to [00] or a multiple
of 4. If you enter a different value, time code will not be recorded correctly.

Setting the Recording Counter

Recording Counter will display the recording time in seconds.
0:00:00 (hour : minute : second (When [REC COUNTER] is set to [TOTAL]))
SCN 0:00:00 (hour : minute : second (When [REC COUNTER] is set to [SCENE]))
[REC COUNTER]
Select the counting method during the recording.
Select the menu.
MENU
: [DISP SETUP] # [REC COUNTER] # desired setting
[TOTAL]:
[SCENE]:
To reset the Recording Counter for the Recording
Mode
The Recording Counter will be set to 0:00:00 when
touched while displaying the counter.
The count continues to increase until the Recording Counter is reset.
Resets the Recording Counter at start of recording. Counts the time
of each recording session.
- 65 -
is
RESET
RESET COUNT DISP/
MODE O.I.S. BARS ZEBRA