User Button; Setting The User Button; Using The User Button - Panasonic HC-MDH3 Owner's Manual

Recording

USER button

Each of the USER button can register one function from the 30 available functions.
≥ There are 3 USER buttons (USER1 to 3) on the main body and 4 USER button icons (USER4 to
USER7) displayed on the LCD monitor.

Setting the USER button

1
Select the menu.
MENU
: [USER SW] # [USER1] to [USER7]
≥ It is not possible to register functions to [USER4] to [USER7] in Playback Mode.
2
Touch the item to register.
≥ For the functions of the USER button that can be registered, refer to page 67.
≥ Touch <INHIBIT> if not registering.
≥ Next (Previous) page can be displayed by touching
3
Touch [EXIT] to complete the setting.
≥ The tables below show the default settings.
USER1
USER2
USER3
USER4
≥ Performing [YES] in [INITIAL SET] restores these default settings.

Using the USER button

To use the function assigned to a USER button or USER button icon, press the applicable USER
button (one of the USER buttons 1 to 3), or touch the applicable USER button icon (one of the
USER button icons 4 to 7) while operation icons are displayed.
(When you use the USER1 to USER2 button)
<PUSH AF>
<WHITE BAL>
<FOCUS ASSIST 1>
<FRZ FRAME>
/ .
USER5
USER6
USER7
(When you use the USER3 button)
- 66 -
<DRS>
<LEVEL GAUGE>
<MENU>
(l 138)
FOCUS ASSIST
3