Table of Contents
Advertisement
∫ To display the on-screen information on the TV
When the menu setting is changed, the information displayed on the screen (operation icon and
Counter display etc.) can be displayed/not displayed on the TV.
MENU
: [DISP SETUP] # [VIDEO OUT OSD] # [ON] or [OFF]
≥ This item is set to [OFF] in the following situations when this unit is in Recording Mode:
j During auto recording
The recorded pictures can be played back on a TV with an SD Memory Card
slot
≥ It may not be possible to play back scenes on the TV depending on the [REC FORMAT] or
[REC MODE].
≥ For details on how to play back, please read the operating instructions for the TV.
Setting the external output resolution
Change the setting for outputting images to a TV or other external device (recorder, etc.).
Select the menu.
MENU
: [OUTPUT SETUP] # [RESOLUTION] # desired setting
[SYSTEM]/[1080p]/[1080i]/[DOWN CONV.]
≥ [SYSTEM] automatically sets the output resolution according to the setting in [REC FORMAT].
If the images are not output on the TV/external device when the setting is [SYSTEM], switch to
the method [1080p], [1080i] or [DOWN CONV.] which enables the images to be displayed on your
TV/external device. (Please read the operating instructions for the TV/external device.)
≥ [DOWN CONV.] outputs images in standard picture quality.
≥ Select [DOWN CONV.] when connecting with the AV cable (commercially-available).
≥ When [REC FORMAT] is set to [SA 480/59.94i], [RESOLUTION] is fixed to [SYSTEM].
≥ [RESOLUTION] cannot be set during Freeze Frame.
≥ Images may not be displayed on the external device for several seconds in some cases, such as
when changing between scenes.
(l
80, 129)
- 103 -
(l
72)
Advertisement
Table of Contents
