KTM 250 EXC TPI 2018 Owner's Manual page 95

–
Check the chain sliding piece for wear.
» If the lower edge of the chain pins is in line with or below
the chain sliding piece:
–
Change the chain sliding piece.
–
Check that the chain sliding piece is firmly seated.
» If the chain sliding piece is loose:
–
Tighten the screw on the chain sliding piece.
Guideline
Screw, chain slid-
ing piece
E00887-10
–
Check the chain guide for wear.
Info
Wear can be seen on the front of the chain guide.
» If the light part of the chain guide is worn:
–
Change the chain guide.
400985-01
–
Check that the chain guide is firmly seated.
» If the chain guide is loose:
–
Tighten the screws on the chain guide.
Guideline
Remaining screws,
chassis
E00333-01
Finishing work
–
Remove the motorcycle from the lift stand. (
12 SERVICE WORK ON THE CHASSIS
M8
M6
15 Nm
(11.1 lbf ft)
10 Nm
(7.4 lbf ft)
p. 66)
93