KTM 250 EXC TPI 2018 Owner's Manual page 144

18 SERVICE WORK ON THE ENGINE
142
Condition
The engine is off.
Preparatory work
–
Remove the seat. (
Main work
–
Remove protection cap
E00917-10
–
Put throttle grip
E00819-11
–
Plug in wake-up connector
the diagnostics connector.
The combination instrument lighting is activated.
Info
The connector is included as part of the motorcycle's
separate enclosure.
–
Wait for at least five seconds.
–
Release the fixing means from the throttle grip.
The oil pump is timed.
Info
The oil pump is actuated a various speeds.
The procedure is clearly audible.
–
Wait until you can no longer hear the oil pump working.
–
Disconnect the wake-up connector from the diagnostics con-
nector.
E00918-10
p. 80)
1
of the diagnostics connector.
2 into full throttle position and secure.
3
for timing the oil pump
4
to